It is currently Thu Aug 17, 2017 1:59 am




 Page 1 of 1 [ 6 posts ] 
Author Message
 Post subject: Aeroforce draw length module
PostPosted: Fri Jun 16, 2017 9:33 pm 

Joined: Fri Nov 20, 2009 7:55 pm
Posts: 185
Location: Pennsylvania
Hi guys, I just bought an aeroforce x80 short draw bow a little while ago and the draw length is set at 28 id like to shorten it to 27 but i dont know what number module is for setting it to 27 my question is what number do i need the guy i planned to buy the moduel fron doesnt know



_________________
when you tried the rest,settle for the best.
http://www.oneidabows.net/
Offline
 Profile  
 
 Post subject: Re: Aeroforce draw length module
PostPosted: Sat Jun 17, 2017 12:32 am 
User avatar

Joined: Fri Apr 10, 2009 11:41 pm
Posts: 646
Location: Manhattan, Kansas
Below, I've attached a link to a specifications chart in the Charts/Manuals section of this forum. For your bow, the chart indicates module B or C for 26"-27" draw length or 27"-28" draw length, respectively. Further complicating matters, the B or C modules will give you 80 percent let off, but if you plan to shoot with fingers, 65% let off using the 42 or 39 modules would be more desirable. Most modules are identified by an impression of the number or letter on one face of the plastic. Without looking, I can't remember exactly where. There seems to be little rhyme or reason for the letter/number designations - the manufacturer's chart is the answer.

viewtopic.php?f=43&t=307

Congratulations and good luck with the new bow.

Tony



_________________
2008 Black Eagle II, short, 50-70#
Mathews Switchback, 28", 55#
Jennings Model T, 28", 55#
Offline
 Profile  
 
 Post subject: Re: Aeroforce draw length module
PostPosted: Sat Jun 17, 2017 8:35 am 

Joined: Fri Oct 03, 2014 8:24 pm
Posts: 695
I have a couple 39's I'd send you.


Offline
 Profile  
 
 Post subject: Re: Aeroforce draw length module
PostPosted: Sat Jun 17, 2017 9:34 am 
Site Admin
User avatar

Joined: Mon Jan 15, 2007 11:13 pm
Posts: 9697
Location: Farmingdale Maine
Emails sent. And if you need any other modules I have some for the Oneida aeroforce bows both short and medium draw.



_________________
American Eagle Bows
Aftermarket Quality Custom Oneida Eagle Bow Repair/Parts/Information.
American Eagle Prototype Bows
Oneida Falcon
Oneida Switchblade Prototype
Offline
 Profile  
 
 Post subject: Re: Aeroforce draw length module
PostPosted: Sat Jun 17, 2017 11:08 am 

Joined: Fri Nov 20, 2009 7:55 pm
Posts: 185
Location: Pennsylvania
Great info thanks guys!



_________________
when you tried the rest,settle for the best.
http://www.oneidabows.net/
Offline
 Profile  
 
 Post subject: Re: Aeroforce draw length module
PostPosted: Sat Jun 17, 2017 7:14 pm 

Joined: Fri Nov 20, 2009 7:55 pm
Posts: 185
Location: Pennsylvania
I got a reply back from Dave and the moduels i need will be shipped out monday thanks guy's



_________________
when you tried the rest,settle for the best.
http://www.oneidabows.net/
Offline
 Profile  
 
Display posts from previous:  Sort by  
 Page 1 of 1 [ 6 posts ] 


Who is online

Users browsing this forum: Bing [Bot] and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  

cron