It is currently Fri Nov 24, 2017 2:14 pm

All times are UTC - 5 hours [ DST ]




 Page 1 of 1 [ 7 posts ] 
Author Message
 Post subject: Need help with model and specs
PostPosted: Mon Sep 04, 2017 1:46 pm 

Joined: Sun Sep 03, 2017 9:45 pm
Posts: 4
Hello, I just bought a bow that I believe is a Black Eagle, but the previous owner peeled off the stickers and decals. I'd like to figure out the model, draw length range, and draw weight range. There isn't a serial number under the grip like my other bows and I didn't find one anywhere else. So here's the specs and hopefully someone will know what I have. Looking at it from the front there is one notch on the top left and two on the right of the power limb. The yoke cables are red power cables are yellow, and the bow measures 43 and a half tip to tip.

Thanks, Jeremy


Offline
 Profile  
 
 Post subject: Re: Need help with model and specs
PostPosted: Mon Sep 04, 2017 5:49 pm 

Joined: Sun Sep 03, 2017 9:45 pm
Posts: 4
Tried uploading pictures but it wouldn't let me. The bow has the newer style cams and doesn't have pylons. The camo on it is "skyline inc apparition excel" if that helps.


Offline
 Profile  
 
 Post subject: Re: Need help with model and specs
PostPosted: Tue Sep 05, 2017 5:11 pm 

Joined: Sun May 26, 2013 5:40 pm
Posts: 1249
Location: Shapleigh, Me
Pictures would be helpful but for now... those three marks indicate it's a 50-70lb bow... cable colors are for the the LF, gets you about 27 1/2 to 30" in draw length. Skyline camo would also be in keeping with a BEI.

Gerry


Offline
 Profile  
 
 Post subject: Re: Need help with model and specs
PostPosted: Thu Sep 07, 2017 1:55 pm 

Joined: Sun Sep 03, 2017 9:45 pm
Posts: 4
Ok thanks for the info. So that would be the medium draw length? My outboard limbs are the wood laminations if that was any different at any time. I'm gonna try to get new decals made so I want to have all of the correct details. Do you know what the string length is supposed to be?


Attachments:
20170907_133639.jpg
20170907_133639.jpg [ 405.27 KiB | Viewed 163 times ]
20170907_133523.jpg
20170907_133523.jpg [ 424.21 KiB | Viewed 163 times ]
20170907_133342.jpg
20170907_133342.jpg [ 599.67 KiB | Viewed 163 times ]
Offline
 Profile  
 
 Post subject: Re: Need help with model and specs
PostPosted: Thu Sep 07, 2017 4:52 pm 

Joined: Sun May 26, 2013 5:40 pm
Posts: 1249
Location: Shapleigh, Me
No on your question regarding your bow being a medium. LF is a size unto itself... it means your bow has medium size cams and LF length outboard limbs. Not sure if you've seen the chart I'm going to provide in a link... your string should be 42 1/2"

Gerry

viewtopic.php?f=43&t=316


Offline
 Profile  
 
 Post subject: Re: Need help with model and specs
PostPosted: Thu Sep 07, 2017 5:27 pm 

Joined: Thu Dec 27, 2012 11:48 am
Posts: 155
I have the same configuration .. Gerry is correct


Offline
 Profile  
 
 Post subject: Re: Need help with model and specs
PostPosted: Thu Sep 07, 2017 7:39 pm 

Joined: Sun Sep 03, 2017 9:45 pm
Posts: 4
Ok thanks! I looked for a while but couldn't find that chart. It really helps a lot! I really appreciate your help


Offline
 Profile  
 
Display posts from previous:  Sort by  
 Page 1 of 1 [ 7 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to: